Twin Cities Carry Forum Archive http://www.twincitiescarry.com/forum/ |
|
Ruger trigger gunsmith needed http://www.twincitiescarry.com/forum/viewtopic.php?f=5&t=13856 |
Page 1 of 1 |
Author: | dcwn.45 [ Sat Aug 15, 2009 6:11 pm ] |
Post subject: | Ruger trigger gunsmith needed |
I have a Ruger Super Blackhawk [.44 mag 7 1/2 in bbl 2x Leopold] that I want to have a trigger job done on. Any reccomendations as to who would do a good job around the metro? I want a quality job, polish , smooth , etc. not just someone who will cut the spring to make the pull lighter, and then I will have reliability issues in the future. |
Author: | JonnyB [ Tue Aug 18, 2009 8:01 am ] |
Post subject: | Re: Ruger trigger gunsmith needed |
While he's a bit outside the metro area, you can try Pat Laib. His shop is in Spicer; 320-796-2686. I don't know if he'll do what you want but phone calls are cheap these days. Perhaps he can refer you to someone closer if he can't/won't do the job. I've had him do other stuff for me but not something like that. jb |
Author: | joelr [ Tue Aug 18, 2009 8:30 am ] |
Post subject: | Re: Ruger trigger gunsmith needed |
dcwn.45 wrote: I have a Ruger Super Blackhawk [.44 mag 7 1/2 in bbl 2x Leopold] that I want to have a trigger job done on. Any reccomendations as to who would do a good job around the metro? I want a quality job, polish , smooth , etc. not just someone who will cut the spring to make the pull lighter, and then I will have reliability issues in the future. He's not around the Metro, but I'd still go with Tom Castonguay. Greg has his contact info. |
Author: | dcwn.45 [ Tue Aug 18, 2009 1:01 pm ] |
Post subject: | Re: Ruger trigger gunsmith needed |
Thanks for the replies, I dropped it off with ryan at bill's today. Got some good feedback about him and i talked with him today and got a good sense. I will report back . |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |